OpenRouter AI Error 401, 402 and Network Error Fix

Looking for a free fix for OpenRouter AI Error 401? Look no further, here in this post, I include almost all OpenRouter errors like OpenRouter AI Error 401, 402, 404, 405, 408, 500, Internal, Unknown, Network, and a few others as well.

I hope you’ll find all the solutions regarding OpenRouter AI Error 401 and other errors. If you find it helpful, then don’t forget to share this post with others who are facing similar problems. So read them carefully and don’t rush. Apply the solutions, and I’m confident they’ll work perfectly.

OpenRouter AI Error 401 – {“error”:{“message”:”No auth credentials found”,”code”:401}}

You’re using the wrong or expired API key.

  • Fix:
    • Check your API key, or you can regenerate your new API key.
    • Double-check that the model name and proxy URL are correct.
    • Go to OpenRouter > Settings > Privacy > Turn ON “Model Training”.
    • Avoid mobile shortcuts—use a real browser tab.

Proxy Error 402 – {“error”:{“message”:”Insufficient credits”,”code”:402}}

OpenRouter AI Error 401, 402 and Network Error Fix

This means you’ve hit OpenRouter AI free tier limits, even though you’re not paying. Free users have a daily credit limit, and it is reset every 24 hours.

  • Fix:
    • Wait for the reset or create a new OpenRouter account (sometimes it works, and sometimes it won’t).
    • Refresh the page and try again later.
    • Use a different free model if available (like DeepSeek-V3).
    • Try during off-peak hours.

Creating new accounts often doesn’t work because:

  • OpenRouter detects duplicate accounts.
  • They may block new free accounts during high traffic.
  • The free credit pool might be temporarily exhausted.

As a last option, you can use a reliable VPN for new accounts. Check below for a good VPN that works well in this situation. It performs best when your internet connection isn’t slow. Also, try using a different browser — for example, if you’re using Chrome, switch to Firefox or another browser.

You can click/press to get your VPN from here – Nord VPN

OpenRouter Proxy Error 404 – {“error”:{“message”:”No endpoints found matching your data policy”,”code”:404}}

  • You didn’t turn on model training.
  • Fix:
    • OpenRouter > Settings > Privacy > Enable “Model Training”

A network error occurred, you may be rate limited or have connection issues: Failed to fetch (unk)

You spammed too fast, or your internet dropped.

Rate limited = too many requests in a short time.

  • Fix:
    • Turn off your Wi-Fi connection and use the mobile connection.
    • Reload the page with a mobile connection.
    • Turn it back on and reroll.
    • Double-check the Model name (no typos or spaces)
    • Proxy URL must be exactly: https://openrouter.ai/api/v1/chat/completions

OpenRouter Proxy Error – No response from bot (pgshag2)

This error occurs due to Targon because Targon is causing issues.

  • Fix:
    • OpenRouter > Settings > Ignored Providers > Add “Targon”
    • Wait for a few minutes and try.
    • You can try DeepSeek V3 or a less crowded model.

Proxy Error 500: Internal Server Error

Likely, it’s happened due to a broken API key or Proxy URL.

  • Fix:
    • Check your API key and URL settings.
    • Check that the OpenRouter is working. You can check on – status.openrouter.ai
    • Wait it out or try another model if needed.

Unknown response: [object Object] (unk)

Most likely, it’s OpenRouter just overloaded with users. Maybe you can try Deepseek through the Chutes AI. It’s more stable. It’s happened due to an often rate-limit or config issue.

  • Fix:
    • Check that your Janitor AI settings are correct.
    • Second, you can wait or make a new account.

OpenRouter/Chutes Prompt: Token Limit Exceeded

You’ve hit your daily 50-message cap because this is all that’s available on the free plan.

  • Fix:
    • Wait for the reset of your credits, or you can use a new account.

OpenRouter Internal Server Error (unk)

Due to the Overloaded free-tier model or an unknown bug.

  • Fix:
    • Try to refresh the API key.
    • Switch to another DeepSeek model like V3.
    • Wait for 4-5 minutes and try again.

Provider Returned Error (unk)

It’s happened due to Server down, rate-limited, or a bad/expired API key.

  • Fix:
    • Block Targon in the (OpenRouter AI Settings > Ignored Providers).
    • Refresh Janitor.ai and try again later.

Proxy Error 405 (unk)

Likely, it occurs due to an invalid request or an issue in URL configuration.

  • Fix:
    • Confirm this Proxy URL: https://openrouter.ai/api/v1/chat/completions
    • Refresh API key: openrouter.ai/keys
    • Block the Targon provider in the OpenRouter settings.
    • Wait 15–20 minutes and retry.
    • Switch to the DeepSeek-V3 model if needed.

Proxy Error 408: Timeout (unk)

The OpenRouter AI server didn’t respond in time. It’s happened due to too many requests, server overload, and slow internet connection.

  • Fix:
    • Please wait 2 minutes and resend your message.
    • Check your internet – switch to a high-speed internet connection.
    • Refresh your API key (old keys sometimes time out).
    • Block the Targon provider in the OpenRouter settings.
    • As a last resort, try late at night or early morning when servers are less busy.

The proxy URL should still be exactly: https://openrouter.ai/api/v1/chat/completions

OpenRouter AI Network Error

It’s Common during overload, or your internet connection is unstable. Free models have limited capacity that gets overwhelmed during peak times. You’re essentially waiting in a digital queue.

  • Fix:
    • Verify that your internet is working correctly.
    • Confirm that the model and Proxy URL are right.
    • Wait 5–10 minutes and retry again, or try in early mornings or late nights (UTC time)
    • Switch to the DeepSeek-V3 model if needed.
    • If it fails, reload twice max – more triggers rate limits

Pro tip: Bookmark OpenRouter Status – the color-coded graph shows when free models are most available (green = good times to retry).

This error doesn’t mean you did anything wrong – it’s the system managing limited free resources. Persistence (with smart timing) usually gets through.

OpenRouter Proxy Error 503: Maintenance (unk)

This basically means the Chutes.ai or DeepSeek servers are currently down for maintenance or experiencing technical difficulties.

  • Fix:
    • When you see this, the best thing to do is just wait it out for a bit and try again later, as the team is probably working on updates or fixing something behind the scenes.
    • If it stays down for an unusually long time, you could temporarily switch to a different model, but most of the time, these maintenance breaks don’t last too long before everything’s back up and running normally again.

Full credit goes to the Janitor AI subreddit and user – imowlekk. I just compiled all the information and fixes in one place.

Share and Stay Informed

If you’ve found all the answers you need regarding the OpenRouter AI Error 401 fix or other error solutions, please consider sharing this information with your friends who love chatting with their AI partner on Janitor AI—they might be interested in the OpenRouter AI Error 401 fix and other solutions as well.

If you’re looking for more Janitor AI error fixes—especially for DeepSeek and OpenRouter—you can check below or visit my site, BeedAI.com

If you appreciate my efforts, please don’t forget to bookmark BeedAI.com — For more amazing free content, like the Janitor AI, Deepseek, Chutes AI error solutions, or free Character AI alternatives, and the best discount coupon deals on popular AI tools and services.

Join the Best AI Community on the Internet

FAQs

OpenRouter AI Error 401?

You’re using the wrong or expired API key, so you must check your API key.

OpenRouter Internal Server Error?

It’s happening due to the Overloaded free-tier model or an unknown bug.

OpenRouter AI Network Error

It’s Common during overload, or your internet connection is unstable. You’re essentially waiting in a digital queue.

Each Share Sparks a Thousand AI Friends 🤖

error: Content is protected !!